The invisible bond behind long-lasting furniture. Engineered with advanced polyvinyl acetate (PVA) synthetic resin emulsion for exceptional tack, smooth spreadability, and a fiber-tearing bond across plywood, block boards, laminates, and wood veneers.
Engineered to give carpenters dependable open time, effortless trowel spreading, and a permanently rigid joint.
Penetrates deep into wood pores and panel fibers, curing into a rigid bond line that is demonstrably stronger than the timber itself.
Provides an 8 to 12 minute working window, allowing craftsmen to align large 8ft × 4ft laminate sheets smoothly without premature skinning.
High solid resin concentration and smooth thixotropic consistency spread evenly with a spreader, giving maximum square footage per kilogram.
Dries to an invisible clear film. Leaves no dark glue lines on exposed seams, decorative wood veneers, or white and pastel laminates.
Formulated with anti-microbial additives that inhibit fungal and mildew growth in tropical and humid indoor conditions.
Water-based, non-flammable formulation with zero toxic solvent fumes, making it comfortable and safe for carpenters on enclosed residential sites.
Recommended parameters to ensure optimal adhesion across workshop and on-site applications.
| Product Name | Planto Synthetic Resin White Adhesive |
|---|---|
| Adhesive Base | Polyvinyl Acetate (PVA) Synthetic Resin Emulsion |
| Appearance / Color | Milky white viscous paste (dries to a transparent, non-staining film) |
| Open Assembly Time | Approx. 8 to 12 minutes at 30°C (varies with temperature and timber porosity) |
| Clamping / Press Time | 2 to 4 hours under firm, uniform pressure |
| Full Cure Time | 24 hours for maximum mechanical and water-resistant strength |
| Compatible Substrates | Plywood, Block Boards, MDF, Particle Board, Wood Veneers, High-Pressure Laminates, and Solid Timber |
| Available Pack Sizes | Packs for carpenters and bulk workshops (e.g., 1 kg, 2 kg, 5 kg, 10 kg, 20 kg, 50 kg buckets). Confirm current batch inventory with Planto. |
| Storage & Shelf Life | Store sealed in a cool, dry place away from direct sunlight and freezing temperatures. Reseal lid tightly after each use. |
Follow these fundamental techniques to prevent bubbles, edge lifting, and delamination.
Ensure both surfaces (plywood face and back of laminate) are completely clean, level, and free of sawdust, grease, or oil.
Apply Planto White Adhesive evenly using a notched spreader or comb. Avoid thick puddles or dry missed patches.
Wait 2 to 3 minutes for initial tackiness, then carefully align the sheet. Press smoothly from the center outwards to expel trapped air.
Clamp with uniform pressure using G-clamps, pressure tape, or mechanical rollers. Maintain pressure for at least 2 to 4 hours.
Wipe off any fresh glue squeeze-out with a damp cloth. Allow a full 24 hours before routing edges or installing heavy hardware.
Formulated for diverse woodworking, cabinet making, and decorative surfacing needs.
Press decorative laminates and natural wood veneers onto plywood and block boards without surface ripples or edge peeling.
High shear strength for mortise-and-tenon joints, wooden dowels, finger joints, and edge-glued solid timber panels.
Assembling durable kitchen carcass boxes, office filing cabinets, bookshelves, and wardrobe side gables.
Mounting decorative wall battens, acoustic panels, architectural moldings, and custom site-built wooden fixtures.
Pair Planto White Adhesive with our engineered panels for guaranteed adhesion and longevity.
Whether you need individual buckets for custom joinery or bulk drum deliveries for high-volume modular factories, our team is ready to support your schedule.